Call us at +1 (864) 526-8528
Call us at +1 (864) 526-8528
Auto-Set:
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
Manual Mode:
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Angled All Aluminum Drive System:
Robust wire drive with Quick Select drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Quick Select Drive Roll:
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
120V Input Power:
Uses 120V household input power so there is no special power requirements. Flexible to use in any location!
Smooth-Start:
This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up.
Auto Spoolgun Detect:
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Thermal Overload & 'Tip Saver' Short Circuit Protection:
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
Comes Complete with:
• 142 MIG Power Source
• 10ft (3m) MDX 100 MIG Gun & Cable Assembly (Accepts Miller MDX Consumables)
• 6.5ft (2 m) power cord with plug
• 10ft (3m) work cable with clamp
• Argon and AR/CO2 mix flow gauge regulator with gas hose
• Hobart spool of .030 inch (0.8mm) solid wire
• Two contact tips for .030 inch (0.8mm) wire
• Quick Select drive rolls for .024 inch (0.6mm) or .030/.035 inch flux-cored wire
• Material thicknes gauge (229895)
• Velco cord wraps (229895)
Auto-Set:
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
Manual Mode:
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Angled All Aluminum Drive System:
Robust wire drive with Quick Select drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Quick Select Drive Roll:
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
120V Input Power:
Uses 120V household input power so there is no special power requirements. Flexible to use in any location!
Smooth-Start:
This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up.
Auto Spoolgun Detect:
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Thermal Overload & 'Tip Saver' Short Circuit Protection:
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
Comes Complete with:
• 142 MIG Power Source
• 10ft (3m) MDX 100 MIG Gun & Cable Assembly (Accepts Miller MDX Consumables)
• 6.5ft (2 m) power cord with plug
• 10ft (3m) work cable with clamp
• Argon and AR/CO2 mix flow gauge regulator with gas hose
• Hobart spool of .030 inch (0.8mm) solid wire
• Two contact tips for .030 inch (0.8mm) wire
• Quick Select drive rolls for .024 inch (0.6mm) or .030/.035 inch flux-cored wire
• Material thicknes gauge (229895)
• Velco cord wraps (229895)
Please review our shipping policy here.
Please review our shipping policy here.
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your items are unopened in original packaging or have never been used
To start a return, you can contact us at alexcruz@ironfusionfab.com
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return questions at alexcruz@ironfusionfab.com
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your items are unopened in original packaging or have never been used
To start a return, you can contact us at alexcruz@ironfusionfab.com
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return questions at alexcruz@ironfusionfab.com
You may also like
Recently viewed
Customer Service
Main Menu
© 2025, Iron Fusion Fab