Call us at +1 (864) 526-8528
Call us at +1 (864) 526-8528
Dual solenoid Leave your gases for both MIG and TIG hooked up, allowing you to easily switch between the two processes. All-in-one Multiprocess Capabilities:
MIG, TIG, or Stick. You choose! Take on a variety of tasks with one machine.
Easy-to-use color LCD Interface:
Set up is a breeze for all three processes with the LCD interface.
Up to 230 amps of Power:
Capable of welding up to 3/8-inch mild steel in a single pass.
Portable Convenience:
Weighing 38 pounds, the Multimatic 215 has a small footprint and a whole lot of power.
Excellent Arc Characteristics:
Extremely stable arc with minimal spatter for less cleanup; Smooth-Start for consistently smooth MIG arc starts.
Smooth-feeding Wire Drive:
Angled wire drive and Quick-Select drive roll for smooth, reliable feeding and fast, no-hassle wire changes.
Multi-voltage plug (MVP):
Easily connects to common 120 V or 240 V power outlets; no tools required. Just choose the plug that fits the receptacle and connect it to the power cord.
Auto-Set Elite:
Fast and easy settings for multiple materials and processes to help you get welding quickly. Auto-Set Elite allows you to fine-tune weld settings while in Auto-Set mode.
Fan-On-Demand technology:
Power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine.
Thermal overload protection:
Automatically shuts down the unit if airflow through the unit is blocked or the duty cycle is exceeded.
Auto Spool Gun Detect:
Automatically detects when a MIG gun or spool gun is connected, eliminating the need for a switch.
Comes complete with:
• Power cord and MVP plugs for 120 Volt and 240 Volt
• 10Ft MDX 100 MIG gun and cable assembly (Accepts Miller MDX Consumables)
• Electrode holder and 25 mm Dinse-style connector
• Work cable and clamp and 25 mm Dinse-style connector
• Flow gauge regulator and gas hose for argon and AR/CO2 mix
• Hobart spool of .030 in. (0.8 mm) solid wire
• Two contact tips for .030 in. (0.8 mm) wire
• Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
• Material thickness gauge
• Hook-and-loop cord wraps
Dual solenoid Leave your gases for both MIG and TIG hooked up, allowing you to easily switch between the two processes. All-in-one Multiprocess Capabilities:
MIG, TIG, or Stick. You choose! Take on a variety of tasks with one machine.
Easy-to-use color LCD Interface:
Set up is a breeze for all three processes with the LCD interface.
Up to 230 amps of Power:
Capable of welding up to 3/8-inch mild steel in a single pass.
Portable Convenience:
Weighing 38 pounds, the Multimatic 215 has a small footprint and a whole lot of power.
Excellent Arc Characteristics:
Extremely stable arc with minimal spatter for less cleanup; Smooth-Start for consistently smooth MIG arc starts.
Smooth-feeding Wire Drive:
Angled wire drive and Quick-Select drive roll for smooth, reliable feeding and fast, no-hassle wire changes.
Multi-voltage plug (MVP):
Easily connects to common 120 V or 240 V power outlets; no tools required. Just choose the plug that fits the receptacle and connect it to the power cord.
Auto-Set Elite:
Fast and easy settings for multiple materials and processes to help you get welding quickly. Auto-Set Elite allows you to fine-tune weld settings while in Auto-Set mode.
Fan-On-Demand technology:
Power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine.
Thermal overload protection:
Automatically shuts down the unit if airflow through the unit is blocked or the duty cycle is exceeded.
Auto Spool Gun Detect:
Automatically detects when a MIG gun or spool gun is connected, eliminating the need for a switch.
Comes complete with:
• Power cord and MVP plugs for 120 Volt and 240 Volt
• 10Ft MDX 100 MIG gun and cable assembly (Accepts Miller MDX Consumables)
• Electrode holder and 25 mm Dinse-style connector
• Work cable and clamp and 25 mm Dinse-style connector
• Flow gauge regulator and gas hose for argon and AR/CO2 mix
• Hobart spool of .030 in. (0.8 mm) solid wire
• Two contact tips for .030 in. (0.8 mm) wire
• Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
• Material thickness gauge
• Hook-and-loop cord wraps
Please review our shipping policy here.
Please review our shipping policy here.
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your items are unopened in original packaging or have never been used
To start a return, you can contact us at alexcruz@ironfusionfab.com
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return questions at alexcruz@ironfusionfab.com
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your items are unopened in original packaging or have never been used
To start a return, you can contact us at alexcruz@ironfusionfab.com
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return questions at alexcruz@ironfusionfab.com
You may also like
Recently viewed
Customer Service
Main Menu
© 2025, Iron Fusion Fab